Jolt squeeze moulding machine for casting

Product Details

The Jolt Squeeze Moulding Machine is suitable for batch production of single sided pattern plate and single flask moulding of small castings,can make cope flask and drag flask.

The Jolt Squeeze Moulding Machine own simple air control system,easy operation,flexible use and convenient repair and maintenance.

The Jolt Squeeze Moulding Machine Special Features

The Jolt Squeeze Moulding Machine Noise Controlled

The Jolt Squeeze Moluding Machine Combined Jolt Squeeze

The Jolt Squeeze Moluding Machine Accurate Centreline Draw

The Jolt Squeeze Moluding Machine Variable Jolt Timers

The Jolt Squeeze Moluding Machine Operational Roller on Pin Lift Draw

The Jolt Squeeze Moluding Machine Operational Safety Guards

The Jolt Squeeze Moulding Machine Work principle

The worktable fall and collide with floating shock-iron,and the sand was tighted slightly, and then to compaction,get the top and bottom of sand mould are tight. The slightly shock is high frequency (500-1000 times/min), small amplitude (5-25 mm) vibration instead of low frequency (60-120 times/min), the large amplitude vibration. The Jolt Squeeze Molding Machine made of sand mold are good quality, the basic requirement is also lower.

The Jolt Squeeze Moulding Machine Work Technical Parameters

Item

Unit

Z144

Max dimension of flask

mm

500×400×180

Worktable dimension

mm

560×465

Air pressure

Mpa

0.6

Compressive strength

KN

42

Jolting load

KN

2.6

Compacting stroke

mm

120

Draw stroke

mm

150

Distance between worktable to pressure head

mm

170-190

Productivity

Mould/h

40-60

 


Feedback
[[ImgSrc-PhoneChat]]